Projet GIR, Serbie

Many Serbian customers rely on the tried and tested Classic Drying Kiln system!

GIR d.o.o. emerged from a small family business in 1993. Today, about 800 employees work in the production, development and sale of furniture made of oak. Great importance is attached to quality and sustainability.

In the furniture factory of GIR d.o.o. in Kraljevo / Serbia, wood has been dried in Mühlböck systems since 2003. Over the years, 14 Classic model drying kilns and a steaming kiln for drying and steaming oak have been installed. As far back as 2014, the existing kilns were converted to the K5 control system. All drying kilns are controlled by a drying management system. With a variety of innovative features and assistance systems, the K5 control system ensures maximum operational safety and efficiency

In January 2021, a drive-through kiln with trolley loading for lamella drying was put into operation. Two Classic kilns are currently being prepared for commissioning.

Thus, 18 Mühlböck systems will be in operation at Gir d.o.o. in the future and the total net drying capacity will exceed 3,000 m³. Jovan and Lale Mandic – sales partners for Serbia – are responsible for the smooth handling from quotation to commissioning at the customer's site.

Further expansion of the drying capacity is being planned.

-------

Article in Serbian:

Projekat GIR/ Srbija
U Srbiji je mnogostruko dokazani sistem sušara klasik u upotrebi!

Preduzeće GIR d.o.o. je nastalo 1993. godine iz male porodične firme. Danas zapošljava oko 800 radnika u proizvodnji, razvoju i prodaji hrastovog nameštaja. Veliki akcenat je stavljen na kvalitet i održivost.

U fabrici nameštaja GIR d.o.o. u Kraljevu/Srbiji od 2003. godine sušenje drveta se vrši u Milbekovim sušarama. U proteklim godinama postavljeno je 14 sušara tipa klasik i jedna parionica za sušenje i parenje hrasta je instalirana. Još 2014. godine došlo je do zamene postojećih automatika na novu K5 automatiku za upravljanje. Što znači da sve sušare imaju instaliran automatski menadžer sušenja. Sa dodatnim opcijama K5 automatika poseduje vrlo efikasno i sigurno vođenje procesa sušenja.

U januaru 2021. godine je puštena u upotrebu protočna sušara za sušenje lamela, punjenjem pomoću vagona. U ovom momentu dve nove klasik sušare se pripremaju za puštanje u upotrebu.

S tim, u preduzeću GIR će u budućnosti biti 18 Milbek komora u eksploataciji, gde će ukupni neto kapacitet preći 3000 m³ drveta. Za neometanu i uspešnu obradu od ponude za projekte, pa do puštanja u rad istih, zaduženi su Jovan i Lale Mandić, partneri prodaje za Srbiju.

Planirano je dalje proširenje kapaciteta sušara.