Project GIR, Serbia

In Serbia, the multiple tried and tested drying system Classic is used!

The company GIR d.o.o. was founded from a small family business in 1993. Today around 800 employees work in the manufacture, development and sale of oak furniture. Great emphasis is placed on quality and sustainability.

At the furniture factory from GIR d.o.o. in Kraljevo / Serbia timber is dried in Mühlböck plants since 2003. Over the years, 14 Classic dry kilns and a steaming kiln for drying and steaming of oak have been installed.
As early as 2014, the existing kilns have been reconstructed to the K5 control system. So all dry kilns are controlled with one drying management. With a multitude of innovative features and assistance systems, the K5 control system ensures maximum operational reliability and efficiency.

In January 2021, a drive through kiln with trolley loading for drying of lamella was put into operation. Currently, two Classic kilns are being prepared for commissioning.

Thus, 18 Mühlböck plants will be in operation at Gir d.o.o. in the future and the total net drying capacity will exceed 3,000 m³. Jovan and Lale Mandic / Sales Partner Serbia are responsible for the smooth handling from the quotation to the commissioning at the customer's site.

A further expansion of the drying capacity is planned.

-------

Serbian translation below:

Projekat GIR/ Srbija
U Srbiji je mnogostruko dokazani sistem sušara klasik u upotrebi!

Preduzeće GIR d.o.o. je nastalo 1993. godine iz male porodične firme. Danas zapošljava oko 800 radnika u proizvodnji, razvoju i prodaji hrastovog nameštaja. Veliki akcenat je stavljen na kvalitet i održivost.

U fabrici nameštaja GIR d.o.o. u Kraljevu/Srbiji od 2003. godine sušenje drveta se vrši u Milbekovim sušarama. U proteklim godinama postavljeno je 14 sušara tipa klasik i jedna parionica za sušenje i parenje hrasta je instalirana. Još 2014. godine došlo je do zamene postojećih automatika na novu K5 automatiku za upravljanje. Što znači da sve sušare imaju instaliran automatski menadžer sušenja. Sa dodatnim opcijama K5 automatika poseduje vrlo efikasno i sigurno vođenje procesa sušenja.

U januaru 2021. godine je puštena u upotrebu protočna sušara za sušenje lamela, punjenjem pomoću vagona. U ovom momentu dve nove klasik sušare se pripremaju za puštanje u upotrebu.

S tim, u preduzeću GIR će u budućnosti biti 18 Milbek komora u eksploataciji, gde će ukupni neto kapacitet preći 3000 m³ drveta. Za neometanu i uspešnu obradu od ponude za projekte, pa do puštanja u rad istih, zaduženi su Jovan i Lale Mandić, partneri prodaje za Srbiju.

Planirano je dalje proširenje kapaciteta sušara.